Could an exercise you added be making your strongman training busier, not better? Accessory work for strongman events should solve a specific problem, not simply add sets because a muscle group feels undertrained. General strength and muscle-building exercises can help, but they may not address the grip, trunk, upper-back or leg demands that affect a carry, press or pull. When event practice and main lifts already tax your recovery, extra work needs a clear purpose.

Start with the event, identify where your performance breaks down, then choose a small amount of work that targets that demand. This guide explains how to assess common event demands, select accessories with relevant carryover and fit them around event practice and your main lifts. It also shows how to keep supplementary training manageable, so it supports progress instead of becoming another generic workout.

Key Takeaways

  • Use accessory work for strongman events to target a clear performance limiter, not to add exercises without a specific purpose.
  • Match the accessory category to the event demand, such as grip endurance for carries or leg drive for pressing.
  • Prioritise event practice and main strength work, then adjust supplementary volume to suit your schedule and recovery.
  • Review whether an accessory is helping. Change it when your progress, technique or recovery gives you a reason to.

What Strongman Accessory Work Should Do for Event Performance

Strongman events ask you to express strength in different ways, from moving awkward loads to pressing overhead. That variety is why accessory work needs a clear job. Accessory work is supplementary training that targets a specific quality or weakness, while event practice develops the skill of performing the event. Use it to address a limitation, not simply to add another exercise to your session.

Think of training in three layers. Event practice develops technique with the relevant implement, including handling, pacing and execution. Main strength work builds broad force production through key lifts. Accessories support qualities that may limit either layer, such as grip endurance, trunk strength or strength in a particular position. Strongman includes a wide range of events and physical demands, as outlined in Strongman (strength athlete), so useful supplementary work depends on the events you are preparing for.

For a practical look at event-specific pressing technique, watch this log clean and press video:

How accessories differ from strongman event practice

An accessory can strengthen a supporting quality, but it cannot teach you to pick, carry or press a particular implement under event conditions. Grip work may support a carry, for example, while trunk work may help you maintain position under load. Keep practising the event itself to refine implement handling, transitions and pacing. Accessories should support that practice, not stand in for it.

Why more accessory volume is not automatically better

Extra exercises can create fatigue without addressing a meaningful weakness. Before adding a movement, identify where performance is limited and how that quality affects the event. Choose a small amount of relevant work, then assess whether you can still perform well in your next event session and main lifts. If supplementary work starts reducing the quality of those priorities, trim it back.

How to Choose Accessory Exercises for Strongman Events

Choose accessories by tracing a performance issue back to the demands of the event. If a carry slows late, the limiter could be grip endurance, trunk stability or the ability to repeat force under fatigue. A press that stalls near lockout calls for a different solution from one that breaks down while you bring the implement into position.

Start with the event, identify your limiting factor, match it to a movement category, then assess whether you can recover and perform the work well. This keeps exercise selection practical and tied to what you need to improve.

Start with the event demand and your limiting factor

Break the event into its main physical demands, then note where your execution changes or slows. Carries require sustained grip, a stable trunk and repeated force production over distance. Loading events combine lifting strength with bracing and efficient transitions. Overhead events may be limited by upper-back strength, shoulder position or leg drive. Use what you observe in training to narrow down the issue. The muscle that feels tired is not automatically the limiter.

The same carry can call for different accessory work for different athletes. If your hands open first, consider a grip-endurance movement, such as a timed hold. If your posture collapses while your grip remains secure, prioritise trunk or upper-back work instead. Recheck the event after making a change to see whether the same limitation still appears.

Choose movements that address the limiter

Match the movement category to the weakness rather than looking for one exercise that suits everyone. For bracing, choose work that challenges you to maintain a stable trunk. For leg drive, use a movement that develops force through positions relevant to your press or loading task. To build pulling strength, choose a variation that lets you practise the part of the pull where your position or force output falters.

Keep your choice measurable. Use consistent technique and compare repeatable performances over time. If your form deteriorates or the movement no longer trains the quality you intended, adjust the exercise or load. Grip aids are optional tools, not a replacement for developing event-relevant grip. If they suit a particular pulling session, explore lifting straps for strength training while keeping your accessory choice centred on the limiter you are addressing.

Accessory Work Examples for Carries, Loading, Pulling, and Pressing

Use these examples as starting points, not fixed prescriptions. Match the movement category to your event, current limitation and training history. The right choice for one athlete may not address another athlete’s weak point.

Match common event patterns to training priorities

  • Carries: If grip endurance is the limiter, try a grip-focused accessory such as a hold. If your posture breaks down first, choose trunk or upper-back work that supports a stable position while moving.
  • Loading: If you struggle to repeat efforts, consider work that develops repeated force production. If you lose position while lifting or placing an object, target strength and control in the relevant positions.
  • Deadlift-style pulls: A weak brace may point towards trunk-focused work. Difficulty maintaining position off the floor may call for strength work through that part of the pull.
  • Overhead pressing: If the implement stalls during the drive, consider leg-drive work. If your upper-back position fades, choose work that supports stability and control overhead.

Test these options against the actual event. Two athletes preparing for the same carry might choose different work: one focuses on grip, while the other works on trunk control. Keep event practice and sound technique central. Accessory work supports strength development; it does not replace handling the implement or practising execution.

Where grip accessories and support gear may fit

Straps or chalk may suit selected pulling tasks, depending on whether the session is intended to train grip or another quality. They are tools, not substitutes for grip development, event practice or sound technique. Competition equipment rules and training goals can differ, so account for the rules that apply to your event and practise the demands you will face.

If straps fit your training task, explore lifting straps for strength training as an optional equipment choice. Keep the focus on the quality you are developing, and assess whether your technique and repeatable performance remain on target.

How to Fit Strongman Accessory Work Around Event Training

Plan supplementary work around the sessions that matter most. Event demands, training experience, weekly schedule and recovery all affect how much extra work you can manage. A newer athlete may benefit from building general strength and learning event technique, while an experienced athlete may be targeting a narrower weakness. Neither needs a fixed amount of accessory volume.

Build a session without letting accessories take over

Keep your priorities in order: practise the event, complete your main strength work, then add accessories only when they address a relevant limiter. Start with a manageable selection instead of filling every spare slot. A demanding event session or a busy training week may leave little room for supplementary work. A lighter period may allow more. Let the demands of the week guide your choices.

Use a simple review sequence:

  1. Protect the quality of event practice and main lifts.
  2. Include accessory work for strongman events only where it serves a clear purpose.
  3. Review technique, performance and recovery before keeping or adjusting the work.

Review progress and choose practical training support

Track the quality you aimed to improve, such as maintaining position, sustaining grip or producing leg drive. Look for repeatable progress in the accessory movement and note whether event practice remains sharp. This does not guarantee a better competition result, but it gives you useful information about whether the work is serving its purpose.

If event execution becomes less consistent, technique deteriorates or you struggle to recover between sessions, reduce the accessory workload or rotate movements. Keep the target in view and reassess after the change. Training support should make planned work more practical, not replace strength development or event practice. If you use a belt, straps, wrist wraps or chalk in your session, treat the equipment as optional and keep the training goal central.

For optional kit to support your strength sessions, explore Team Industry strength gear.

Make Your Next Training Block More Intentional

Choose one event limitation to focus on in your next training block. Record how it shows up in practice, select a relevant accessory and review whether the work supports your sessions without compromising technique or recovery. Keep the goal clear, then adjust when your training gives you a reason to.

Team Industry supports strongman and other strength-sport athletes with apparel and strength gear. The right equipment can support a planned session, but event practice and sound training decisions remain central. Explore Team Industry strength gear to find optional equipment for your strength training.

Build patiently, stay consistent and let purposeful training guide your next step.

Frequently Asked Questions

What is accessory work in strongman training?

Accessory work in strongman is additional training that develops a supporting capacity alongside your event and strength sessions. Use it to investigate a recurring bottleneck, not simply to add exercises. If your hands fatigue during several pulling tasks, for instance, grip capacity may be worth targeting. If the problem appears only with one implement, event technique or handling may be a more useful place to focus.

Which accessory exercises help with strongman events?

The best choice depends on the event setup and where your performance changes. A farmer’s walk slowed by slipping hands presents a different problem from one affected by tight turns. Loading to a high platform also demands different positions from loading over a lower barrier. Select a movement category that targets the issue you observed, then assess whether that quality carries into event practice.

How many accessory exercises should I do for strongman?

Start with one or two well-chosen movements, then adjust based on your training experience, schedule and recovery. Keep a brief log of the target, technique quality and how you feel at the next priority session. If those sessions stay productive and the intended quality improves, the amount may be manageable. If performance or recovery suffers, reduce the work before adding anything else.

Should I use lifting straps for strongman accessory work?

Straps can be useful on selected pulling work when the session targets a quality other than grip, such as back strength. Keep some relevant pulling or carrying practice without them if grip is part of your event demand, and account for your competition rules. For optional equipment, view lifting straps for strength training.

Can bodybuilding exercises improve strongman event performance?

Yes. Bodybuilding-style exercises can support strongman preparation when they address a real need, such as building muscle in an area that contributes to your lifts. Treat them as supplementary work, not a substitute for developing event skills or practising with the relevant implements. Choose movements you can perform consistently, and keep them only if they fit your priorities without undermining key training sessions.

Latest Stories

Alle anzeigen

Choose Strongman Training Gear for Carries and Deadlifts

Choose Strongman Training Gear for Carries and Deadlifts

The right kit for strongman training starts with stable footwear, suitable lifting straps and equipment matched to the events you practise. Choosing essential gear for strongman training means thinking beyond general gym…

Weiterlesenüber Choose Strongman Training Gear for Carries and Deadlifts

Lever Belts vs Prong Belts: Compare Adjustments Between Lifts

Lever Belts vs Prong Belts: Compare Adjustments Between Lifts

Neither fastening system is better for every lifter. Whether lever belts are better than prong belts depends on how you want to adjust the fit between lifts. A lever belt is quick to fasten once set, while a prong belt i…

Weiterlesenüber Lever Belts vs Prong Belts: Compare Adjustments Between Lifts

Knee Sleeves for Lifting: Compare Support, Fit and Grip

Knee Sleeves for Lifting: Compare Support, Fit and Grip

The thickest sleeve isn’t automatically the best choice. Knee sleeves commonly come in 3 mm, 5 mm and 7 mm thicknesses; thicker options provide more compression but less mobility. To decide what the best knee sleeves for…

Weiterlesenüber Knee Sleeves for Lifting: Compare Support, Fit and Grip